NKX10ZTN SKF Combined Type Needle Roller Bearing with Thrust Ball Bearing 10mm X 19mm X 23mm
NKX10ZTN SKF Combined Type Needle Roller Bearing with Thrust Ball Bearing 10mm X 19mm X 23mm
£42.01£35.01
In stock
SKU
NKX10ZTN-SKF
0.04kg
NKX10ZTN SKF Needle Roller / Thrust Ball Bearing 10x19x23mm
Needle roller / thrust ball bearings can accommodate axial loads in one direction and can, therefore, locate the shaft in one direction only. For short shafts and where changes in length as a result of thermal expansion are relatively minor, two bearings can be mounted back-to-back.
Needle roller / thrust ball bearings in the NKX series with the designation suffix Z have a stamped steel cover without lubrication holes. The steel cover extends over the shaft washer of the thrust ball bearing. It is firmly attached to the housing washer that is integral to the needle roller bearing outer ring. The cover makes these bearings non-separable.
Size 10mm x 19mm x 23mm.
Z -Combined needle roller bearing, factory greased thrust bearing with a cover without lubrication holes over the outside diameter.
TN -Glass fibre reinforced PA66 cage.
Needle Roller + Thrust Ball Bearings can be used in a wide of industries such as lifting equipment, agricultural, pumps, air conditioning units, fans and general engineering applications.
Needle roller / thrust ball bearings in the NKX series combine a radial needle roller bearing and a thrust ball bearing with a ball and cage thrust assembly identical to the 511 series. They permit relatively high-speed operation. The outer ring flange locates the bearings axially in one direction.
Returns are accepted within a 90-day period, and goods will only be accepted if the following criteria is met:
Goods are still in the original, undamaged, and unopened packaging.
The item has not been used, fitted, modified, or damaged.
You have notified us no later than 90 days since receipt of goods.
Any products or quantities that have been sourced specifically to complete your order will be exempt from our standard returns policy and will be subject to handling charges. The rate of the handling charge is dependent on our suppliers’ current rates.
Products such as timing belts and ribbed belts that have been cut to your specification are also exempt from our standard returns policy.
Products that are ordered in error can also be returned, however the incurred costs for shipping will not be refunded.
Once inspection of goods has been carried out, a refund issued to the payment method used to make the initial purchase.