PNA40/62 SKF Needle Roller Bearing With Machined Rings With Flanges, With Inner Ring 40x62x20mm

PNA40/62 SKF Needle Roller Bearing With Machined Rings With Flanges, With Inner Ring 40x62x20mm SKF alignment needle roller bearings have an outer ring with a sphered outside surface. Two polymer seating rings with a sphered inside surface are encased in a drawn sheet steel sleeve and fitted over the outer ring. This design enables the bearing to accommodate static misalignment of the shaft relative to the housing. In applications where the shaft cannot be hardened and ground, bearings with an inner ring should be used. The permissible axial displacement of the shaft relative to the housing is limited for bearings with an inner ring. If the permissible axial displacement provided by a standard inner ring is insufficient, it is possible to use an extended inner ring. Bearings without an inner ring are an excellent choice for compact bearing arrangements, if the shaft can be hardened and ground. Size 40mm x 62mm x 20mm.

Sizes - d=40mm, D=62mm, B=20mm, D1=58mm, F=45mm

PNA - Alignment needle roller bearing, with inner ring.

Needle Roller And Cage Assembly Bearings can be used in a wide of industries such as lifting equipment, agricultural, pumps, air conditioning units, fans and general engineering applications.